Thursday, 12 December, 2024

31 May 2016 | eLABORATE

news > Spectrum > Page 18

New! Zirkonzahn Prettau Anterior

New Products

Prettau® Anterior® is a new and highly biocompatible zirconia material from Zirkonzahn. Due to its high translucency, it is ideally suited for use in the anterior tooth region and hence offers an ideal alternative to lithium disilicate.


According to a test procedure for determining the flexural strength, carried out at the University of Pennsylvania, Prettau Anterior has been able to achieve a value of 670 MPa. In the biaxial tensile test, carried out in accordance with ISO 6872 norm, lithium disilicate only attained approx. 360 MPa (+/- 60 MPa). The new zirconia material has the same translucency as lithium disilicate, while possessing a much higher flexural strength. The range of indications of Prettau Anterior includes single and partial crowns, inlays, onlays, veneers and max. 3-unit bridges (fully anatomic or reduced). Moreover, Prettau Anterior is also perfectly appropriate for the posterior region.

Due to the optimised microstructure of zirconia, Prettau Anterior has highly translucent and aesthetic properties. In combination with the Colour Liquids Prettau Anterior Aquarell especially developed for this purpose, the ICE Zirkon Prettau Stains and ICE Zirkon 3D by Enrico Steger Stains, fully anatomic restorations are now also possible in the anterior tooth region. In this way, the problem of ceramic chipping in the anterior tooth region can be avoided. As with Prettau Zirconia, the know-how of the dental technician is not particularly required for the layering technique, but rather for the colouring technique: the occlusal surface does not need to be tediously layered with ceramic, as it is directly copied from the fully modelled tooth.

Contrary to glass ceramic, Prettau Anterior is a polychrome (multi-coloured) material. This means that a Prettau Anterior restoration can be coloured in several colours already before the sintering process. This allows for individual solutions for every patient. Restorations made of glass ceramics merely show colour shades before sintering and only get their final characteristics through the use of colouring stains.

Unlike glass ceramics, it distinguishes itself not only through the higher bending strength, but also through its processing method, which is the same as for Prettau Zirconia: for processing of Prettau Anterior neither water cooling nor diamond drills are required.

The material is milled dry and with common zirconia burs. This results in shorter milling times and lower material usage and wear. Prettau Anterior is sintered at only 1500°C, resulting in shorter sintering times.

Stream the latest dental videos...
VITA Easyshade V: Activation and calibration

Upcoming Events...

Dec 15 2024

CBCT licensing course

Online via Zoom, AUSTRALIA

Dec 15 2024
Jan 01 2025
Mar 15 2025
Mar 25 2025

IDS 2025

Cologne, GERMANY

Mar 29 2025
May 08 2025
May 30 2025
Jun 07 2025
Jun 21 2025
Sep 13 2025
Sep 20 2025
Mar 20 2026
Apr 17 2026

IDEM Singapore 2026

Singapore, SINGAPORE