Thursday, 7 December, 2023

30 Nov 2016 | eLABORATE

news > Spectrum > Page 16

Sinterofen 300S sintering furnace: Furnace for Zirkonzahn Sintermetall

New Products

The compact Sinterofen 300S sintering furnace is fully glazed in the typical Zirkonzahn design and has been developed especially for Sintermetall sintering.

The high performance vacuum pump enables oxygen-free sintering without the use of shielding gas. Thanks to the very long-lasting SiC heating elements, the furnace requires low maintenance and is very robust.

The optimal temperature distribution, the shrinkage factor of Zirkonsahn Sintermetall of just 7% as well as its torsional stability allow the sintering of all milled dental restorations from single crowns, metal structures, telescopes, bars and attachments up to full arch bridges with a total lack of stresses in the metal.

Using the Sintering Tray Sintermetall XL 300S (for small structures of up to 5 elements) up to 50 Sintermetall elements can be sintered in the large sintering tube of the sintering furnace. With the especially developed Sintering Holder XL 300S (patent pending), it is possible to sinter two full arch bridges or up to six bars in one sintering process. Both sintering supports as well as the necessary Sintering Powder are included in the scope of delivery. After the eight-hour sintering process, the oven cools down automatically and controlled. The sintering process as well as the remaining sintering time can be checked at any time on the easy-to-use 109mm colour touchscreen panel. The Sinterofen 300S sintering furnace is quickly and easily updateable via USB port.

Stream the latest dental videos...
VITA ENAMIC Reworking Tutorial

Upcoming Events...

Jan 08 2024
Feb 13 2024
Mar 09 2024
Mar 12 2024
Mar 13 2024
Mar 21 2024

ADX24 Sydney


Apr 16 2024

Dentists Behaving 'Very' Badly


Apr 19 2024

IDEM Singapore 2024

Singapore, SINGAPORE

May 11 2024
May 14 2024
May 24 2024
Jun 01 2024
Jun 22 2024
Sep 07 2024
Sep 14 2024
Mar 25 2025

IDS 2025

Cologne, GERMANY

May 08 2025